SP-350 Denise, Cousteau’s Science Submersible

Posted on 25 October 2022 by yonetici in 3d models, General, Products, Submarine, Toys, Vehicle Models, Vehicles | Comments Off

The SP-350 Denise, famous as the “Diving saucer” (Soucoupe plongeante), is a small submarine designed to hold two people, and is capable of exploring depths of up to 400 metres (1,300 ft). It was invented by Jacques-Yves Cousteau and engineer Jean Mollard at the French Centre for Undersea Research.^[1] It was built in the year 1959 and usually operated from Cousteau’s ship, the Calypso. More on Wikipedia.

Continue reading for more renderings, information and STL files for 3d printing.

Pages: 1 2

Type 209-1400 Submarine

Posted on 21 October 2022 by yonetici in 3d models, General, Submarine, Toys, Vehicle Models, Vehicles | Comments Off

The Type 209 is a class of diesel-electric attack submarine developed exclusively for export by Howaldtswerke-Deutsche Werft of Germany. The original variant (Type 209/1100) was designed in the late 1960s. The class is exclusively designed for export market. Despite not being operated by the German Navy, five variants of the class (209/1100, 209/1200, 209/1300, 209/1400 and 209/1500) have been successfully exported to 13 countries, with 61 submarines being built and commissioned between 1971 and 2008. More on wikipedia.

Read more for more renderings and download link for the STL files.

Mechanical Remote Control Handheld Unit

Posted on 04 October 2022 by yonetici in 3d models, Antique Cars, Cars, Products, Toys, Vehicle Accesories, Vehicle Models, Vehicles | Comments Off

This is a 3d printable model for mechanical RC projects. It uses bicycle brake wires for transferring steering information and there is empty space inside for two 18650 Type li-ion batteries.

The first version has round buttons and the second one has rectangle switches. You can mix different top covers to obtain other versions. Continue reading for more info.

Fiat 126 Fog – Rear Lights

Posted on 02 October 2022 by yonetici in 3d models, Antique Cars, Cars, General, Lighting, Products, Vehicle Accesories, Vehicle Models, Vehicles | Comments Off

These lights should fit to a fiat 126p or bis. 3d printable as usual.

Mırmır Electric Vehicle

Posted on 29 September 2022 by yonetici in 3d models, General, Products, Toys, Vehicle Models, Vehicles | Comments Off

It is the design that won me a 3rd prize in a national design competition. This is a new and improved version of Mırmır, which is modified to be a scaled down 3d printable model-toy. It can be push uperated or can be made as a RC car. It has a DC drive motor, ample space for a steering mini servo, independent rubber suspension both at the front and rear. It is a small and funny project.

Continue reading for more info and STL files for 3d printing.

Pages: 1 2

Messerschmitt Cycle Car KR200

Posted on 26 September 2022 by yonetici in 3d models, Antique Cars, Cars, General, Toys, Vehicle Models, Vehicles | Comments Off

The Messerschmitt KR200, or Kabinenroller (Cabin Scooter), is a three-wheeled bubble car designed by the aircraft engineer Fritz Fend and produced in the factory of the German aircraft manufacturer Messerschmitt from 1955 until 1964.

This is a 3d printable model toy of the vehicle. The canopy opens and closes, wheels turn etc. Nice gift for your child.

Read more for more renderings and STL files.

Pages: 1 2

Railton Special Speed Record Car

Posted on 25 September 2022 by yonetici in 3d models, Antique Cars, Cars, General, Products, Toys, Vehicle Models, Vehicles | Comments Off

The Railton Special: A Thrilling Tale of Tire-Squealing Speed!

Introduction

Hold onto your hats, ladies and gentlemen, because we’re about to take a wild ride through the exhilarating world of the Railton Special! This ain’t your grandma’s sedan; this is the stuff of automotive legend, where horsepower meets the pursuit of insanity and then goes, “Hold my oil can!”

A Uniquely Insane Beginning

Picture this: the late 1930s, a time when engineers were less concerned with cupholders and more interested in making things go fast. Enter Reid Railton, a mad genius with an itch to build a car that would send other vehicles crying to their garage. His mission? To break land speed records and make every other car feel like it’s stuck in reverse!

The Heart-Pounding Power

Beneath the hood of the Railton Special lay the heart of a beast, a supercharged 27-liter Rolls-Royce V12 aircraft engine that was basically a mechanical dragon on wheels. With a wild 500 horsepower – that’s right, 500 – this engine made other engines whimper and beg for mercy. It’s the kind of power that could make 0 to 60 mph feel like teleportation, and it did it in less time than it takes to order a fast-food burger.

continue reading for the renderings of the model and the links to the STL files.

Pages: 1 2

Fiat 126 Mechanical Remote Controlled Model

Posted on 17 September 2022 by yonetici in 3d models, Antique Cars, Fiat 126 Parts and Accesories, General, Toys, Vehicle Accesories, Vehicle Models, Vehicles | Comments Off

Do you remember those cable operated RC cars from our childhood?

Well you can 3d print and have one.

Continue reading for the project files.

Pages: 1 2 3

Gotland and A26 Class Submarines

Posted on 29 August 2022 by yonetici in 3d models, Boats, General, Submarine, Toys, Vehicle Models, Vehicles | Comments Off

The Gotland-class submarines of the Swedish Navy are modern diesel-electric submarines, which were designed and built by the Kockumsshipyard in Sweden. They are the first submarines in the world to feature a Stirling engineair-independent propulsion (AIP) system, which extends their underwater endurance from a few days to weeks. This capability had previously only been available with nuclear-powered submarines. Read More on Wikipedia.

I modeled the sub to be easily printable. Also made the newer swedish sub A26 with its distinctive sail design.

Albatros Flying Ship

Posted on 29 August 2022 by yonetici in 3d models, General, Movie Props, Vehicle Models, Vehicles | Comments Off

There is a new model for Albatros, it’s 3d printable and 1meter long, check it here.

Robur the Conqueror (French: Robur-le-Conquérant) is a science fiction novel by Jules Verne, published in 1886. It is also known as The Clipper of the Clouds. It has a sequel, Master of the World, which was published in 1904. Read More o n W i k i p e d i a .