3d models

Mechanical Remote Control Handheld Unit

This is a 3d printable model for mechanical RC projects. It uses bicycle brake wires for transferring steering information and there is empty space inside for two 18650 Type li-ion batteries.

There are two versions as shown.

The first version has round buttons and the second one has rectangle switches. You can mix different top covers to obtain other versions. Continue reading for more info.

Read More

Fiat 126 Fog – Rear Lights

These lights should fit to a fiat 126p or bis. 3d printable as usual.

Read More

Mırmır Electric Vehicle

Mırmır is a tadpole trike

It is the design that won me a 3rd prize in a national design competition. This is a new and improved version of Mırmır, which is modified to be a scaled down 3d printable model-toy. It can be push uperated or can be made as a RC car. It has a DC drive motor, ample space for a steering mini servo, independent rubber suspension both at the front and rear. It is a small and funny project.

Continue reading for more info and STL files for 3d printing.

Read More
Pages: 1 2

Messerschmitt Cycle Car KR200

The Messerschmitt KR200, or Kabinenroller (Cabin Scooter), is a three-wheeled bubble car designed by the aircraft engineer Fritz Fend and produced in the factory of the German aircraft manufacturer Messerschmitt from 1955 until 1964.

3d printable model of the legendary car

This is a 3d printable model toy of the vehicle. The canopy opens and closes, wheels turn etc. Nice gift for your child.

Read more for more renderings and STL files.

Read More
Pages: 1 2

Railton Special Speed Record Car

The Railton Special, later rebuilt as the Railton Mobil Special, is a one-off motor vehicle designed by Reid Railton and built for John Cobb‘s successful attempts at the land speed record in 1938.

It is currently on display at Thinktank, Birmingham Science Museum, England.[1]

There is more info on wikipedia.

Here is my 3d printable model

continue reading for the renderings of the model and the links to the STL files.

Read More
Pages: 1 2

Fiat 126 Mechanical Remote Controlled Model

Do you remember those cable operated RC cars from our childhood?

Well you can 3d print and have one.

Continue reading for the project files.

Read More
Pages: 1 2 3

USB Power Bank

This is a 3d printable usb power bank for daily use. It has a 18650 battery inside and a charger module which both can be purchased online. Continue reading for more information and STL files for the parts.

Read More
Pages: 1 2

Gotland Class Submarine

The Gotland-class submarines of the Swedish Navy are modern diesel-electric submarines, which were designed and built by the Kockumsshipyard in Sweden. They are the first submarines in the world to feature a Stirling engineair-independent propulsion (AIP) system, which extends their underwater endurance from a few days to weeks. This capability had previously only been available with nuclear-powered submarines. Read More on Wikipedia.

I modeled the sub to be easily printable. Also made the newer swedish sub A26 with its distinctive sail design.

Read More
Pages: 1 2

Albatros Flying Ship

Robur the Conqueror (French: Robur-le-Conquérant) is a science fiction novel by Jules Verne, published in 1886. It is also known as The Clipper of the Clouds. It has a sequel, Master of the World, which was published in 1904. Read More on Wikipedia.

I modeled the ship as close as to the original used in the 1961 movie.

the movie

Continue reading for more images and STL files for 3d printing.

Read More
Pages: 1 2 3

Fiat S76

The Fiat S76, later also known as Fiat 300 HP Record and nicknamed “The Beast of Turin“, was a car built in 1910 by the Italian company Fiat specifically to beat the land speed record. Its 28,353 cc displacement engine delivered 290 hp. Only two examples were built. More info.

I made this 3d model specificly for 3d printing. It has moving wheels, steering wheel, front suspension, axles, interior details etc.

The engine has 4 actual pistons inside the motor which are connected to the crank handle, therefore turn when you turn the handle. There are also gears that engage the engine shaft to the chain pulley and the rear wheels.

There are two sets of wheels: with straight spokes or bicycle-cross spokes. You can choose and print either of them or mixed if you like, as they are in my renderings.

The length is around 210mm to fit most 3d printers. If you have a larger or smaller printer, you might scale before print as you wish for course.

Read more for more information and STL files to print this lovely (one of my favourites) model.

Read More
Pages: 1 2 3 4
indian porn sexnxxx.cc xvideos Amateur Porn video porno amatoriali filmeporno.top lupoporno film porno gratuit xnxx
video porno देसी सेक्स एचडी पॉर्न ऊपर ऊपर से चुदाई Големи цици filme porno gratis sexohnegrenzen.com popular nudes leaked