Here is a 3d printable carbody design for the lovely Fiat 126 aka the Maluch.
The length of the body is 1.44m in design but it is easily scalable into any dimension in your 3d printing program.
Read on for more information, renderings and links for downloading the STL files. Happy 3d printing.
Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 12mm thick plywood. Requiress one and half standart 1220x2440mm plywood sheet.
CAM files for the Land Rover tot rod kids car body.
Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 10mm thick plywood. Requiress two standart 1220x2440mm plywood sheets.
Earlier version Land rover as well as later Defender series can be made by using the parts. More than one copy of some of the parts are inserted into the empty spaces of the plywood sheets in case they are needed or they can be used to build customized versions of the vehicle. See the pictures for different versions.
Assembly is done by using bolts and nuts only. All slots and holes are present at the model files. Some sanding, cutting or shaping should be necessary after laser cutting.
This vehicle body fits to my other product: tot rod mini car chassis..
sizes and bolt holes etc. match. Please look for it in my other designs.
Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 12mm thick plywood. Requiress less than one standart 1220x2440mm plywood sheet (approx 2/3 as shown in pics).
CAM files and plans for a 1.4m long mini car chassis.
Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 12mm thick plywood. Requiress less than one standart 1220x2440mm plywood sheet (approx 2/3 as shown in pics).
