Dummy Security Camera.

Posted on 09 March 2015 by yonetici in For the home, Products, Security, Vehicle Accesories | Comments Off

I’ve searched the net for a dummy security camera to place in front of my apartment, didn’t be able to find a good & free one. So designed my own.

The camera lens inside is actually a wide angle LED lens which is available on the market. Even without it the cam will look very real.

There are 4 holes for 3mm leds that will imitate IR lighting leds inside the cameras. There is empty space inside so if you like you can place a circuit to flash them, or anyhting else. Even a real camera can be fitted in, making my design not a dummy but a real security cam. Ebay is full of small cameras, many of them wireless that canfit inside.

There is also a dummy wireless antenna thing on top.

Full Size Pocket Cornet

Posted on 06 March 2015 by yonetici in Music, Products | Comments Off

Modeled this after extensively measuring the dimensions of the instruments I have, which are;
Olds Ambassador Cornet,
King Master Cornet,
Holton Collegiate Cornet and
Bach Prelude Pocket Trumpet.

The air path gets wider all the way from the mouthpiece to the bell as it should in a cornet (excluding the valveblock area ).
The mouthpiece is a 5B, as close as possible model of a well known cornet mouthpiece with wonderful sound.
All parts are made or divided into smaller units, enabling this to be printed by using almost any printer, small or large.
As usual I guess it will be a challenge to have the valves operate properly.

Vespa Classic Model Steampunk.

Posted on 23 January 2015 by yonetici in Bike Accesories, Products, Toys | Comments Off

Here is a 3D model of a classic Vespa for your desktop.

Vespa Classic Tabletop Model — Vespa Classic
Tabletop Model

Read on for more renderings, step by step modeling album and the link for the STL files download.

Full Size Printable Trumpet.

Posted on 23 January 2015 by yonetici in Music, Products | Comments Off

I’ve made a full size trumpet recently. Several people from different countries have printed and tested it, reporting some good news.

Read more to view the detailed renders of the 3d model and download the STL files for printing your own.

Mp3 Players, Zeppelin Themed.

Posted on 23 January 2015 by yonetici in For the home, Kitsch, Lighting, Music, Products, Toys | Comments Off

Here is the Hindenburg. Mp3 player blimp lamp hanging decoration.

I used a mp3 player module-board bought from ebay for 4.5$. it works nice.

This is the chinese mp3 player from ebay.

Read on to download the STL files for the parts of the product.

Pages: 1 2

Multi-mode Table Clock

Posted on 10 January 2014 by yonetici in For the home, Products, Timing | Comments Off

This is a new clock design which I’ve been working on for several days. It uses our multi-clock electronic circuit & hardware. The case is a completely new design from scratch. Can be printed by a rapid prototype machine. Comprised of 5 parts, front and rear body, 3 buttons and a rear lid for programmer slot. This product is the first one with this feature that enables firmware updates through this lid. Just open the lid, insert the programming socket and upload new firmware. No tools, no unscrewing necessary. Read on for downloading the necessary files. You can click this, this or this for our older clock designs.

Perspective view in steampunk clock mode

3d printed and assembled clock, working.

Mini mp3 player holder for bikes.

Posted on 18 December 2013 by yonetici in Bike Accesories, Outdoor, Products | Comments Off

This is a new mounting accesory for mini cube mp3 players which are abundant on the market. These nice and very cheap mp3 players can be fixed on any bike handle or 1in dia pipe with this design. Tested and approved, works quite good. A little piece of rubber, tire patch or silicone glue placed and dried before assembly will make the device hold its groud firmly while supporting your mp3 player.

Accesory on my Strida Bike, holding the cube mp3 player.

view from below, the multicolor led of the player shines thru the semitransparent abs body.

Continue reading to download the STL file for 3d printing this accesory.

Pages: 1 2 3

Mechanical Trotting Toy Horse.

Posted on 11 December 2013 by yonetici in For the home, General, Products, Toys | Comments Off

I saw this toy in Landskrona museum sweden. It was i guess around 100 years old. I liked it and made this design. Not identical to the toy in museum, this is quite a new design. But everything is tested and simulated in solidworks. It will run nice.