Robot Vacuum Mini

Posted on 17 October 2022 by yonetici in 3d models, General, Houses, Products, Robots | Comments Off

Here is a cute robot vacuum mini. Its mini, so printer friendly. Can be produced with most printers in one piece. Easy to assemble and produce by using reasonably priced standard parts. Dowload and enjoy.

Two 50mm radial fans are used as the suction motors, the drive motors are standard DC toy motors which can be found very easily on the web.

Pages: 1 2

Mechanical Remote Control Handheld Unit

Posted on 04 October 2022 by yonetici in 3d models, Antique Cars, Cars, Products, Toys, Vehicle Accesories, Vehicle Models, Vehicles | Comments Off

This is a 3d printable model for mechanical RC projects. It uses bicycle brake wires for transferring steering information and there is empty space inside for two 18650 Type li-ion batteries.

The first version has round buttons and the second one has rectangle switches. You can mix different top covers to obtain other versions. Continue reading for more info.

Fiat 126 Fog – Rear Lights

Posted on 02 October 2022 by yonetici in 3d models, Antique Cars, Cars, General, Lighting, Products, Vehicle Accesories, Vehicle Models, Vehicles | Comments Off

These lights should fit to a fiat 126p or bis. 3d printable as usual.

Mırmır Electric Vehicle

Posted on 29 September 2022 by yonetici in 3d models, General, Products, Toys, Vehicle Models, Vehicles | Comments Off

It is the design that won me a 3rd prize in a national design competition. This is a new and improved version of Mırmır, which is modified to be a scaled down 3d printable model-toy. It can be push uperated or can be made as a RC car. It has a DC drive motor, ample space for a steering mini servo, independent rubber suspension both at the front and rear. It is a small and funny project.

Continue reading for more info and STL files for 3d printing.

Pages: 1 2

Messerschmitt Cycle Car KR200

Posted on 26 September 2022 by yonetici in 3d models, Antique Cars, Cars, General, Toys, Vehicle Models, Vehicles | Comments Off

The Messerschmitt KR200, or Kabinenroller (Cabin Scooter), is a three-wheeled bubble car designed by the aircraft engineer Fritz Fend and produced in the factory of the German aircraft manufacturer Messerschmitt from 1955 until 1964.

This is a 3d printable model toy of the vehicle. The canopy opens and closes, wheels turn etc. Nice gift for your child.

Read more for more renderings and STL files.

Pages: 1 2

Railton Special Speed Record Car

Posted on 25 September 2022 by yonetici in 3d models, Antique Cars, Cars, General, Products, Toys, Vehicle Models, Vehicles | Comments Off

The Railton Special: A Thrilling Tale of Tire-Squealing Speed!

Introduction

Hold onto your hats, ladies and gentlemen, because we’re about to take a wild ride through the exhilarating world of the Railton Special! This ain’t your grandma’s sedan; this is the stuff of automotive legend, where horsepower meets the pursuit of insanity and then goes, “Hold my oil can!”

A Uniquely Insane Beginning

Picture this: the late 1930s, a time when engineers were less concerned with cupholders and more interested in making things go fast. Enter Reid Railton, a mad genius with an itch to build a car that would send other vehicles crying to their garage. His mission? To break land speed records and make every other car feel like it’s stuck in reverse!

The Heart-Pounding Power

Beneath the hood of the Railton Special lay the heart of a beast, a supercharged 27-liter Rolls-Royce V12 aircraft engine that was basically a mechanical dragon on wheels. With a wild 500 horsepower – that’s right, 500 – this engine made other engines whimper and beg for mercy. It’s the kind of power that could make 0 to 60 mph feel like teleportation, and it did it in less time than it takes to order a fast-food burger.

continue reading for the renderings of the model and the links to the STL files.

Pages: 1 2

Fiat 126 Mechanical Remote Controlled Model

Posted on 17 September 2022 by yonetici in 3d models, Antique Cars, Fiat 126 Parts and Accesories, General, Toys, Vehicle Accesories, Vehicle Models, Vehicles | Comments Off

Do you remember those cable operated RC cars from our childhood?

Well you can 3d print and have one.

Continue reading for the project files.

Pages: 1 2 3

USB Power Bank

Posted on 30 August 2022 by yonetici in 3d models, For the home, Lighting, mp3, Outdoor, Products, Vehicle Accesories | Comments Off

This is a 3d printable usb power bank for daily use. It has a 18650 battery inside and a charger module which both can be purchased online. Continue reading for more information and STL files for the parts.

Pages: 1 2

Gotland and A26 Class Submarines

Posted on 29 August 2022 by yonetici in 3d models, Boats, General, Submarine, Toys, Vehicle Models, Vehicles | Comments Off

The Gotland-class submarines of the Swedish Navy are modern diesel-electric submarines, which were designed and built by the Kockumsshipyard in Sweden. They are the first submarines in the world to feature a Stirling engineair-independent propulsion (AIP) system, which extends their underwater endurance from a few days to weeks. This capability had previously only been available with nuclear-powered submarines. Read More on Wikipedia.

I modeled the sub to be easily printable. Also made the newer swedish sub A26 with its distinctive sail design.

Albatros Flying Ship

Posted on 29 August 2022 by yonetici in 3d models, General, Movie Props, Vehicle Models, Vehicles | Comments Off

There is a new model for Albatros, it’s 3d printable and 1meter long, check it here.

Robur the Conqueror (French: Robur-le-Conquérant) is a science fiction novel by Jules Verne, published in 1886. It is also known as The Clipper of the Clouds. It has a sequel, Master of the World, which was published in 1904. Read More o n W i k i p e d i a .