Mp3 Players, Zeppelin Themed.

Posted on 23 January 2015 by yonetici in For the home, Kitsch, Lighting, Music, Products, Toys | Comments Off

Here is the Hindenburg. Mp3 player blimp lamp hanging decoration.

I used a mp3 player module-board bought from ebay for 4.5$. it works nice.

This is the chinese mp3 player from ebay.

Read on to download the STL files for the parts of the product.

Pages: 1 2

Multi-mode Table Clock

Posted on 10 January 2014 by yonetici in For the home, Products, Timing | Comments Off

This is a new clock design which I’ve been working on for several days. It uses our multi-clock electronic circuit & hardware. The case is a completely new design from scratch. Can be printed by a rapid prototype machine. Comprised of 5 parts, front and rear body, 3 buttons and a rear lid for programmer slot. This product is the first one with this feature that enables firmware updates through this lid. Just open the lid, insert the programming socket and upload new firmware. No tools, no unscrewing necessary. Read on for downloading the necessary files. You can click this, this or this for our older clock designs.

Perspective view in steampunk clock mode

3d printed and assembled clock, working.

Mini mp3 player holder for bikes.

Posted on 18 December 2013 by yonetici in Bike Accesories, Outdoor, Products | Comments Off

This is a new mounting accesory for mini cube mp3 players which are abundant on the market. These nice and very cheap mp3 players can be fixed on any bike handle or 1in dia pipe with this design. Tested and approved, works quite good. A little piece of rubber, tire patch or silicone glue placed and dried before assembly will make the device hold its groud firmly while supporting your mp3 player.

Accesory on my Strida Bike, holding the cube mp3 player.

view from below, the multicolor led of the player shines thru the semitransparent abs body.

Continue reading to download the STL file for 3d printing this accesory.

Pages: 1 2 3

Mechanical Trotting Toy Horse.

Posted on 11 December 2013 by yonetici in For the home, General, Products, Toys | Comments Off

I saw this toy in Landskrona museum sweden. It was i guess around 100 years old. I liked it and made this design. Not identical to the toy in museum, this is quite a new design. But everything is tested and simulated in solidworks. It will run nice.

Printed prototype. The maker says “it is a beautiful model and the mechanics work perfektly. Thank you very much endtas, for creating this. The 2 year old girl cousin of my girlfriend will love this “

VolksWagen T3 Bus Toy

Posted on 10 December 2013 by yonetici in Products, Toys, Vehicles | Comments Off

I didn’t be able to be brave enough to buy a real one so I’ve made a toy VW T3 camper bus. Here are some images and the STL files for 3d printing.

Steampunk Table Clock

Posted on 08 December 2013 by yonetici in For the home, Products, Timing | Comments Off

This is a design for a table clock which uses the steampunk clock hardware & firmware.

Solidworks screenshot of the design in steampunk clock mode

table clock running with bikepunk face graphics.

Read more to download the STL, PCB and HEX files for design. Pretty much everything to build this product.

Dot Matrix Hand/Bike Torch.

Posted on 28 November 2013 by yonetici in Bicycles, Bike Accesories, General, Lighting, Outdoor, Products, Proteus Projects, Vehicle Accesories, Vehicles | Comments Off

My recent project is a first in the world. As far as i’ve searched, I didnt be able to find a similar product. See the video for its operation details.

STL files for the body and bike handlebar mount kit is included in the article.

5×5 dot matrix display & lighting leds. shown with accesory for bicycle handlebar mounting

Mp3 Player Headlight for bikes.

Posted on 13 November 2013 by yonetici in Bike Accesories | Comments Off

Here is an other bicycle product.

There are already some products in the market that combines mp3 playing and a headlight but although china originated they are a bit too expensive. on the other hand, there are many headlights, hand torches and mp3 players which all are very cheap.

So I’ve concentrated on this deep 🙂 issue and designed an mp3-headlight-torch suitable both for bike as well as manual usage by using the parts of products which are already present abundantly and cheaply at the market.

First I’ve bought several cheap mp3 players. They are around 12$ in İstanbul and their performance is quite good, they even have radios and equilizers. 🙂

Pages: 1 2 3 4 5

Solar Panel Mount for bikes.

Posted on 13 November 2013 by yonetici in Bicycles, Bike Accesories, Outdoor, Products, Vehicle Accesories, Vehicles | Comments Off

This product is aimed to be used on bikes, but can be used elsewhere where a small solar panel attachment is needed. The part is quite strong & sturdy , able to carry up to 1kg with ease.