A spoiler design for the air cooled fiat 126p.
Renault 12 Toros Mirror Cover
Here is a 3d printable design for converting your ordinary Renault 12 Toros Mirrors to California type mirrors.
Yes it is a mirror fairing. No tools needed for installation, it is snap-on.
There are two versions, the first one is the plain one.
And the second one has a small BMW styple ear at the side.
Read more to see more photos and the download the STL files.
Puch Magnum Seat Toolbox Lid
I have made these three toolbox lid designs a while ago. And i guess it is better to publish them instead of keeping in the computer until they get lost due to a HDD failure 😀
You know those plastic lids are get lost very easily. I’ve got 3 magnums and none of them had a lid on it when i bought them. So I made this lid.
They are modeled to be 3d printed. All three fit the original plastic seat tail part. They are printed and tested. Read more for the STL files.
Puch Moped Electric Conversion
I always loved mopeds, especially puch mopeds and among all, magnums 😀 Several years ago I bought not one, not two but 3 magnums to restore them. Two of them were rather complete, but the third one was not so complete. So i decided to convert it to electric power. So I made lots of … Read more
Vehicle Wheel Cover Designs.
We designed some wheel hub covers, all of which are 3d printable and compatible with a 4×98 bolt pattern. There is a free sample at the end of the article. Click the images below to enlarge.
Read on for details of the designs and the link to the base version sponsored by endtas.com
Electric Scooter DIY
A scooter design suitable to be built as a kick scooter or an electric vehicle. Made up from sheet plywood.
The parts are cut by using a laser cutter, dxf files for laser cutting is included. The assembly is done by using suitable sized nuts and bolts. Gluing is not necessary but can be used.
I’ve covered the parts with epoxy after assembly and also added some fiberglass fabric wetted with epoxy to reinforce wheel axle area, load bearing parts of the ply and stepping surfaces for friction.
Overall a nice project to work on, easy to assemble and great fun.
Retro Handheld Game Console
I like retro games, especially retro game consoles. When i was a kid, one of our neighbour’s who used to work in abroad, used to bring his son electromechanic portable game devices or consoles I remember. We also queu up as the other kids to have our chance to play with the games. They were interesting, nearly nothing electronic or solid state inside, everything working with gears, wires, dc motors, lamps (not leds) and some color filters for creating screen effects.
I sketched several similar console designs on paper first. Selected one of them which would be easier to design, 3d print and assemble then started working in solidworks.
took me a short while to3d model the main form and a bit longer to model the components and interior assembly details.
Citroen 1CV inspired tot rod car body
Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 12mm thick plywood. Requiress one and half standart 1220x2440mm plywood sheet.
