This is a new project. It will be an electric powered outboard motor for small boats when complete.
So far I’ve made the propeller only and sharing it right away.
Renault 12 Toros Mirror Cover
Here is a 3d printable design for converting your ordinary Renault 12 Toros Mirrors to California type mirrors.
Yes it is a mirror fairing. No tools needed for installation, it is snap-on.
There are two versions, the first one is the plain one.
And the second one has a small BMW styple ear at the side.
Read more to see more photos and the download the STL files.
Puch Magnum Seat Toolbox Lid
I have made these three toolbox lid designs a while ago. And i guess it is better to publish them instead of keeping in the computer until they get lost due to a HDD failure 😀
You know those plastic lids are get lost very easily. I’ve got 3 magnums and none of them had a lid on it when i bought them. So I made this lid.
They are modeled to be 3d printed. All three fit the original plastic seat tail part. They are printed and tested. Read more for the STL files.
Puch Moped Electric Conversion
I always loved mopeds, especially puch mopeds and among all, magnums 😀 Several years ago I bought not one, not two but 3 magnums to restore them. Two of them were rather complete, but the third one was not so complete. So i decided to convert it to electric power. So I made lots of … Read more
Vehicle Wheel Cover Designs.
We designed some wheel hub covers, all of which are 3d printable and compatible with a 4×98 bolt pattern. There is a free sample at the end of the article. Click the images below to enlarge.
Read on for details of the designs and the link to the base version sponsored by endtas.com
Electric Scooter DIY
A scooter design suitable to be built as a kick scooter or an electric vehicle. Made up from sheet plywood.
The parts are cut by using a laser cutter, dxf files for laser cutting is included. The assembly is done by using suitable sized nuts and bolts. Gluing is not necessary but can be used.
I’ve covered the parts with epoxy after assembly and also added some fiberglass fabric wetted with epoxy to reinforce wheel axle area, load bearing parts of the ply and stepping surfaces for friction.
Overall a nice project to work on, easy to assemble and great fun.
