Steampunk Table Clock

Posted on 08 December 2013 by yonetici in For the home, Products, Timing | Comments Off

This is a design for a table clock which uses the steampunk clock hardware & firmware.

Solidworks screenshot of the design in steampunk clock mode

Solidworks screenshot of the design in steampunk clock mode

table clock running with bikepunk face graphics.

Read more to download the STL, PCB and HEX files for design. Pretty much everything to build this product.

From Behind

From Behind

Devon Thread Mode

Devon Thread Mode

rear view

rear view

Circuit Schematic

Circuit Schematic

128x64 Graphics LCD and the mainboard

128×64 Graphics LCD and the mainboard

2012-12-15 15.29.59

The board from the solder side

LCD assembled onto the PCB

LCD assembled onto the PCB

Cuckoo Clock Mode

Cuckoo Clock Mode

Steampunk

Steampunk

Temperature Logger Mode

Temperature Logger Mode

Flames in the oven

Flames in the oven

Motorcyclepunk

Motorcyclepunk

Bicyclepunk 😀

STL files for 3D printing

[download id=”33″]

Note that the PCB is one sided. Tracks on the other side of the pcb can be made by jumper wires.

[download id=”41″]

Hex file is below.

[download id=”42″]

Comments are closed.