All of them are 3d printable. Diameter is 119mm. Can be scaled up and down in any ratio necessary.
Continue reading the article for the STL files.
Vehicles
Renault 12 Toros Mirror Cover
Here is a 3d printable design for converting your ordinary Renault 12 Toros Mirrors to California type mirrors.
Yes it is a mirror fairing. No tools needed for installation, it is snap-on.
There are two versions, the first one is the plain one.
And the second one has a small BMW styple ear at the side.
Read more to see more photos and the download the STL files.
Puch Magnum Seat Toolbox Lid
I have made these three toolbox lid designs a while ago. And i guess it is better to publish them instead of keeping in the computer until they get lost due to a HDD failure 😀
You know those plastic lids are get lost very easily. I’ve got 3 magnums and none of them had a lid on it when i bought them. So I made this lid.
They are modeled to be 3d printed. All three fit the original plastic seat tail part. They are printed and tested. Read more for the STL files.
Puch Moped Electric Conversion
I always loved mopeds, especially puch mopeds and among all, magnums 😀 Several years ago I bought not one, not two but 3 magnums to restore them. Two of them were rather complete, but the third one was not so complete. So i decided to convert it to electric power. So I made lots of … Read more
Vehicle Wheel Cover Designs.
We designed some wheel hub covers, all of which are 3d printable and compatible with a 4×98 bolt pattern. There is a free sample at the end of the article. Click the images below to enlarge.
Read on for details of the designs and the link to the base version sponsored by endtas.com
Electric Scooter DIY
A scooter design suitable to be built as a kick scooter or an electric vehicle. Made up from sheet plywood.
The parts are cut by using a laser cutter, dxf files for laser cutting is included. The assembly is done by using suitable sized nuts and bolts. Gluing is not necessary but can be used.
I’ve covered the parts with epoxy after assembly and also added some fiberglass fabric wetted with epoxy to reinforce wheel axle area, load bearing parts of the ply and stepping surfaces for friction.
Overall a nice project to work on, easy to assemble and great fun.
Citroen 1CV inspired tot rod car body
Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 12mm thick plywood. Requiress one and half standart 1220x2440mm plywood sheet.
Land Rover tot rod car bodyshell
CAM files for the Land Rover tot rod kids car body.
Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 10mm thick plywood. Requiress two standart 1220x2440mm plywood sheets.
Earlier version Land rover as well as later Defender series can be made by using the parts. More than one copy of some of the parts are inserted into the empty spaces of the plywood sheets in case they are needed or they can be used to build customized versions of the vehicle. See the pictures for different versions.
Assembly is done by using bolts and nuts only. All slots and holes are present at the model files. Some sanding, cutting or shaping should be necessary after laser cutting.
This vehicle body fits to my other product: tot rod mini car chassis..
sizes and bolt holes etc. match. Please look for it in my other designs.
