Tarre Vizsla Helmet

Posted on 21 September 2021 by yonetici in 3d models, General, Movie Props, Toys | Comments Off

I modeled this helmet by using some hand sketches wandering around the net.

The model is 3d printable and wearable. Multiple parts for easier printing are included in the package. A visor part is present which should be printed by using a transparent filament. If needed , it can be omitted and the visor can be left empty.

The model differs from the models on the net by being anatomically correct. Its dimensions and form are considerably different from the sketches or other 3d models. I’ve made this model by matching the shape and the dimensions of the average human head. Further size adjustment can be made in the slicer or during assembly by adjusting parts spacing and foam thickness for the helmet to better fit to your head.

Ghosts & Goblins for led lighting.

Posted on 07 September 2021 by yonetici in 3d models, For the home, General, Kitsch, Lighting, Mobile home, Movie Props, Products, Toys | Comments Off

For a request here is a quick model, download, print and have fun. There are many other free models STLs too, take a look.

Read more for the STL file. If you need more STLs of any kind, please contact us.

Robot Vacuum Cleaner

Posted on 03 September 2021 by yonetici in 3d models, For the home, General, Kitchenware, Outdoor, Products, Robots, Toys | Comments Off

Endtas robot vacuum project is now ready to download.

Read on for more information, renderings and STL files for 3d printing.

Pages: 1 2 3 4 5 6

Dot Matrix Clock

Posted on 03 September 2021 by yonetici in Boxes, Cars, For the home, Kitchenware, Products, Proteus Projects, Timing, Vehicle Accesories | Comments Off

This is a design for use as a table or a in-vehicle clock. It utilizes a DS 1307 real time clock chip and powered by a pic 12F683 microcontroller. The power can be supplied via a standard USB cable.

Read more for more informatin, renderings, step by step assembly photos, STL files for 3d printing as well as source C codes for the microcontroller. Have fun building it.

Pages: 1 2 3 4 5

Fiat 126 city concept 3d model

Posted on 28 August 2021 by yonetici in 3d models, Antique Cars, Cars, Fiat 126 Parts and Accesories, Products, Toys, Vehicle Models, Vehicles | Comments Off

This is the Fiat 126 Vettura Urbana concept (or ‘city car’ concept, if you translate the Italian… everything sounds better in Italian), revealed in 1976 and designed for Fiat by venerable designer Giovanni Michelotti, who penned lots of nice stuff you haven’t really heard of. His 1961 Alpine A110 was alright, mind. This particular vision of the future was based on the teeny 126 city car, and although small, it wasn’t a toy.

The body STL including the engine can now be downloaded at the following pages. There is also a version with separate STL files for each piece, sliding doors, operational engine parts. The engine parts, pulleys, pistons etc, can be driven by a small electric motor hidden in the transmission which is also connected to the rear wheels. So this model can drive with electric power. With additional work, can be made to run with remote control. A challenging and very nice project to build.

Pages: 1 2 3 4

Fiat 126/500 air cooled engine model

Posted on 28 August 2021 by yonetici in Antique Cars, Fiat 126 Parts and Accesories, General, Toys, Vehicle Accesories, Vehicle Models, Vehicles | Comments Off

Here is a 3d model air cooled engine with internal moving parts, pistons, piston rods, pulleys, crank and a cooling fan.

Read more for more information and the links to the basic version engine STL file and the purchase page of a improved version with STLs for every part of the engine.

Electric outboard

Posted on 19 August 2021 by yonetici in 3d models, Boats, General, Outdoor, Vehicle Accesories, Vehicles | Comments Off

This is a 3d printable outboard motor design for use in small hobby boats.

read more for more info and the STL files for 3d printing.

Pages: 1 2 3 4

Strengthening a 3D Printed Part

Posted on 07 August 2021 by yonetici in 3d models, Bicycles, Bike Accesories, General, Outdoor, Products, Vehicle Accesories, Vehicles | Comments Off

As we all know, 3D printed parts produced by our ordinary home type printers are not so strong and when used in place of actual parts, they don’t last long. I thought it would be great If it is possible to somehow strengthen the 3d printed parts and worked on the subject a bit.

Strengthening a 3d part may give us the ability to use those parts in place of actual working, load bearing parts. So instead of trying to find an original replacement part for a broken one of our gadgets, robots, vehicles, mechanical toys or in any mechanical tech project we develop, we can simply go with the 3d printed parts.

Click read more to continue.