Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 12mm thick plywood. Requiress one and half standart 1220x2440mm plywood sheet.
Vehicles
Land Rover tot rod car bodyshell
CAM files for the Land Rover tot rod kids car body.
Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 10mm thick plywood. Requiress two standart 1220x2440mm plywood sheets.
Earlier version Land rover as well as later Defender series can be made by using the parts. More than one copy of some of the parts are inserted into the empty spaces of the plywood sheets in case they are needed or they can be used to build customized versions of the vehicle. See the pictures for different versions.
Assembly is done by using bolts and nuts only. All slots and holes are present at the model files. Some sanding, cutting or shaping should be necessary after laser cutting.
This vehicle body fits to my other product: tot rod mini car chassis..
sizes and bolt holes etc. match. Please look for it in my other designs.
Mini moke tot rod kid’s car bodyshell
Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 12mm thick plywood. Requiress less than one standart 1220x2440mm plywood sheet (approx 2/3 as shown in pics).
Tot Rod Car Chassis
CAM files and plans for a 1.4m long mini car chassis.
Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 12mm thick plywood. Requiress less than one standart 1220x2440mm plywood sheet (approx 2/3 as shown in pics).
Fiat 126p 3D Model.
The Fiat 126 (Type 126) is a four passenger, rear-engined city car that was introduced by Fiat in October 1972 at the Turin Auto Show[1] as a replacement for the Fiat 500. The majority of 126s were produced in Bielsko-Biała, Poland, as the Polski Fiat 126p, where production continued until 2000. In many markets Fiat stopped sales of the 126 in 1993 in favour of their new front-engined Cinquecento. Total production reached almost 4.7 million units.
In Poland the car became a cultural icon and earned the nickname Maluch, meaning “The Little One” or “Toddler”.[3][4] It eventually became an official model name in 1997 when Maluch started appearing on the rear of the car.
This is a 3d printable model of the Fiat 126 car which is scaled down and modified to be a toy. Can be built as a cable controlled car or even a wireless r/c car depending on your ability. Read on for more pictures and the download link for the STL files.
Dummy Security Camera.
I’ve searched the net for a dummy security camera to place in front of my apartment, didn’t be able to find a good & free one. So designed my own.
The camera lens inside is actually a wide angle LED lens which is available on the market. Even without it the cam will look very real.
There are 4 holes for 3mm leds that will imitate IR lighting leds inside the cameras. There is empty space inside so if you like you can place a circuit to flash them, or anyhting else. Even a real camera can be fitted in, making my design not a dummy but a real security cam. Ebay is full of small cameras, many of them wireless that canfit inside.
There is also a dummy wireless antenna thing on top.
VolksWagen T3 Bus Toy
I didn’t be able to be brave enough to buy a real one so I’ve made a toy VW T3 camper bus. Here are some images and the STL files for 3d printing.
Dot Matrix Hand/Bike Torch.
My recent project is a first in the world. As far as i’ve searched, I didnt be able to find a similar product. See the video for its operation details.
STL files for the body and bike handlebar mount kit is included in the article.
Solar Panel Mount for bikes.
This product is aimed to be used on bikes, but can be used elsewhere where a small solar panel attachment is needed. The part is quite strong & sturdy , able to carry up to 1kg with ease.
