Mp3 player holder for bikes

Posted on 21 May 2013 by yonetici in General, mp3, Music, Outdoor, Products, Vehicle Accesories | Comments Off

I’d published a product for mounting mp3 players to bikes some months ago. Recently I’ve resized it, converted its locking mechanism to a double lock for added strength and printed one, by using an UP printer. I’ve assembled it to my folding bike with the mp3 player that i’ve bought from the market for just 14$. The design turned out to be nice, performed its duty well, holding the mp3 player in place at the same time directing its sounds towards the rider. Though the speakers of the player were at the sides, the sound was being distributed to the sides and music was a bit difficult to hear without redirection.

now sound is good. The STL files are at the end of the article for the ones who want to print their own product.

Bicycle Computer 16×2 LCD.

Posted on 22 December 2012 by yonetici in Bicycles, Bike Accesories, Outdoor, Products, Proteus Projects, Puch, Timing, Vehicle Accesories, Vehicles | Comments Off

This is a bicycle computer product with 16×2 LCD screen, real time clock, temperature sensor, light sensor, total & trip distance measurement, even a knight rider led display that changes its swing speed according to the bike’s speed. A very fun project.

The prototype made on multiholed prototyping board

Flashing rear light for bicycles.

Posted on 17 December 2012 by yonetici in Bike Accesories, Outdoor | Comments Off

A product powered by pic 12F675 microcontroller. The circuit drives 6-8 leds separated into two groups which can be red and blue, imitating a police type rear-front flasher.

Bicycle wheel POV message system.

Posted on 17 December 2012 by yonetici in Bicycles, Bike Accesories, General, Lighting, Outdoor, Products, Vehicle Accesories, Vehicles | Comments Off

Pages: 1 2 3

Alien Bike Light Mini.

Posted on 13 December 2012 by yonetici in Bicycles, Bike Accesories, Outdoor, Products, Vehicle Accesories, Vehicles | Comments Off

Yet an other bicycle light design which uses the same circuitry with the solar charged bike light project.

Pages: 1 2 3

Mp3 player housing for bikes.

Posted on 09 December 2012 by yonetici in Bike Accesories, Outdoor, Products | Comments Off

The mount is for chinese made rectangular mp3 players which are abundant on the market. They are cheap and run good too.

four parts. The mount holds the player on the handlebar while reflecting the sound of the side-placed speakers to the front.

suitable for bicycles as well as motorbikes.

Bike Light 3 ; The Alien.

Posted on 09 December 2012 by yonetici in Bicycles, Bike Accesories, Outdoor, Products, Vehicle Accesories, Vehicles | Comments Off

🙂 This is my third bike light. It uses the same circuitry with the “solar charged bicycle light project”

Pages: 1 2 3 4

Bicycle Handlebar Light.

Posted on 02 December 2012 by yonetici in Bike Accesories, Lighting, Outdoor, Products, Puch, Toys, Vehicle Accesories, Vehicles | Comments Off

Here is the first complete product project of endtas. It is LED headlight for bicycles. It has got two 1W leds, one with a wide angle and the other with a narrow beam angle lens.

The wide lens is a bit turned towards the ground to light up nearby ahead and the other straight ahead for greater distance lighting.

This is a microprocessor controlled inttelligent light with 9 lighting modes.

1. Double 5mm led flash

2. Double 1W leds triple flash

3. Double 1W leds continuous flash

4. Continuous power 1st grade + flash/2seconds

Pages: 1 2 3

A Velomobile design.

Posted on 02 April 2012 by yonetici in Bicycles, General, Outdoor, Vehicles | Comments Off

Here is the full & working 3d model of the velomobile I’ve designed.

From Wikipedia, the free encyclopedia
A velomobile or bicycle car is a human-powered vehicle, enclosed for aerodynamic advantage and protection from weather and collisions. They are virtually always single-passenger vehicles. They are derived from recumbent bicycles and tricycles, with the addition of a full fairing (aerodynamic shell). There are few manufacturers of velomobiles; some are homebuilt. Some models have the operator’s head exposed; this has the advantage of giving the operator unobstructed vision, hearing, and some cooling, with the disadvantage of being more exposed to weather and less aerodynamic. Read more for the downloading the model.