A mini caravan for the Fiat 126

Posted on 14 May 2021 by yonetici in 3d models, General, Houses, Mobile home, Outdoor, Toys, Vehicles | Comments Off

The caravan has two internal plans, one is the salon version the other is a camping version with wc. 🙂

Pages: 1 2 3 4 5

3d House Models

Posted on 13 May 2021 by yonetici in 3d models, For the home, General, Houses, Outdoor, Toys | Comments Off

I’ve made these several years ago, instead of just cluttering my hard drives. They are complete models with gardens, plants, lighting etc.

Here they are open to download to whom that might use them.

Pages: 1 2 3 4

Lighting box

Posted on 03 May 2021 by yonetici in Bike Accesories, Boats, Fiat 126 Parts and Accesories, For the home, Lighting, Outdoor, Products, Puch, Vehicle Accesories, Vehicles | Comments Off

This is a shell design which I’ve made for a led vehicle RPM meter. But it can be used for lighting etc indoors or outdoors.

Pages: 1 2 3

3d printable outboard project

Posted on 25 April 2021 by yonetici in Boats, General, Outdoor, Vehicle Accesories, Vehicles | Comments Off

This is a new project. It will be an electric powered outboard motor for small boats when complete.

So far I’ve made the propeller only and sharing it right away.

Pages: 1 2

Bike handlebar switch designs

Posted on 18 April 2021 by yonetici in Bike Accesories, General, Outdoor, Products, Puch | Comments Off

I’ve made some switch designs which can be used in all kinds of bikes with 22 mm handlebars.

various switch and potentiometer combinations are possible

Citroen 1CV inspired tot rod car body

Posted on 25 February 2019 by yonetici in Antique Cars, General, Outdoor, Plywood tot rods, Toys, Vehicles | Comments Off

CAM files for the tot rod kids car bodyshell inspired from citroen 2cv prototype. The body can be used for DIY hobby projects, building your child a ride etc.

Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 12mm thick plywood. Requiress one and half standart 1220x2440mm plywood sheet.

Mini mp3 player holder for bikes.

Posted on 18 December 2013 by yonetici in Bike Accesories, Outdoor, Products | Comments Off

This is a new mounting accesory for mini cube mp3 players which are abundant on the market. These nice and very cheap mp3 players can be fixed on any bike handle or 1in dia pipe with this design. Tested and approved, works quite good. A little piece of rubber, tire patch or silicone glue placed and dried before assembly will make the device hold its groud firmly while supporting your mp3 player.

Accesory on my Strida Bike, holding the cube mp3 player.

view from below, the multicolor led of the player shines thru the semitransparent abs body.

Continue reading to download the STL file for 3d printing this accesory.

Pages: 1 2 3

Dot Matrix Hand/Bike Torch.

Posted on 28 November 2013 by yonetici in Bicycles, Bike Accesories, General, Lighting, Outdoor, Products, Proteus Projects, Vehicle Accesories, Vehicles | Comments Off

My recent project is a first in the world. As far as i’ve searched, I didnt be able to find a similar product. See the video for its operation details.

STL files for the body and bike handlebar mount kit is included in the article.

5×5 dot matrix display & lighting leds. shown with accesory for bicycle handlebar mounting

Solar Panel Mount for bikes.

Posted on 13 November 2013 by yonetici in Bicycles, Bike Accesories, Outdoor, Products, Vehicle Accesories, Vehicles | Comments Off

This product is aimed to be used on bikes, but can be used elsewhere where a small solar panel attachment is needed. The part is quite strong & sturdy , able to carry up to 1kg with ease.

on the strida, powering my mp3 player torch. A usb cable runs from panel to product for power transfer.

Pages: 1 2

Bike computer with graphics screen

Posted on 22 May 2013 by yonetici in Bicycles, Bike Accesories, Outdoor, Products, Proteus Projects, Puch, Timing, Vehicle Accesories, Vehicles | Comments Off

I’ve designed a complete new hardware & software for the bicycle comp that I’ve published some months ago. This one has a 128X64 monochrome graphics screen instead of the 16×2 character display of the former one.

The product is held on the handlebar by two elastic o-rings

this has got real time clock as well as the temperature sensor like the old one. But all data can either be shown fully digital or two different analog display modes.